Fabtech 3-Inch Trail Suspension Lift Kit with Stealth Shocks (18-24 Jeep Wrangler JL 4-Door, Excluding 4xe & Rubicon 392)Find parts that fit my vehicle

Unbeatable Off-Road Performance. Designed for the Wrangler JL platform in mind, this premium Suspension Lift Kit from Fabtech is exactly what you need to upgrade your Jeep and unlock its full off-roading potential. Delivering a 3-Inch lift, this kit takes care of the factory nose-down stance and completely levels out the front with the rear end. It also offers ample amounts of ground clearance over the factory setup, minimizing bottoming out incidents and thus preventing unwanted underside damage. The increased ride height means you’ll be able to clear a more aggressive wheel and tire combo too. A 35-Inch tire will clear the stock fenders with minor trimming required, and if you’re prepared to do some cutting, the high clearance fenders will even accommodate 37-Inch tires.

Dominate Off-Road Trails. Since this is one of the more high-end 3-Inch lift kits on the market, Fabtech made sure to only include premium components. To that end, you get heavy duty dual rate coil springs and Fabtech’s very-own monotube Stealth Shocks. Using a 50mm OD steel body that houses the 46mm piston and the 14mm Nitrocarb piston rod, these shocks are as durable as they are capable. Delivering much better damping performance over the stock units, these shocks were engineered to absorb harder and harsher impacts without sacrificing any on-road ride quality. The dual rate springs offer increased wheel articulation without losing that OEM feel.

Factory Suspension Geometry. To make sure your Jeep runs and drives as good as it did with the stock setup despite the 3-Inch lift, this kit includes control arm links, sway bar links, and a draglink flip system. Together, they make sure the driveline and the steering system work within the factory margins. This kit also comes with bump stop extensions and a rear track bar bracket that eliminates mount deflection by repositioning the factory track bar to reduce the roll center.

Installation Process. This kit includes installation instructions. Professional installation is recommended due to the sheer number of components, but if you’re a skilled DIY mechanic you can probably complete the installation process in a few hours.

Limited Lifetime Warranty. This kit comes with Fabtech’s Limited Lifetime Warranty. For more information about the product or the warranty please contact customer support.

Application. This Fabtech 3-Inch Suspension Lift Kit with Stealth Shocks fits 2018-2024 Jeep Wrangler JL 4WD 4-Door. It does NOT fit 4xe and Rubicon 392 models.

Fitment:

• 2018 Jeep Wrangler
• 2019 Jeep Wrangler
• 2020 Jeep Wrangler
• 2021 Jeep Wrangler
• 2022 Jeep Wrangler
• 2023 Jeep Wrangler
• 2024 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov