Fabtech 3-Inch Sport Suspension Lift Kit with Dirt Logic 2.25 Reservoir Shocks (18-24 Jeep Wrangler JL 4-Door, Excluding 4xe & Rubicon 392)Find parts that fit my vehicle

Go Almost Anywhere. The Sport Suspension Lift Kit is one of Fabtech’s most popular products. It commands a premium price, but you get a premium product in return. Designed for off-road enthusiast who won’t settle for anything but the best, this kit offers 3 Inches of lift. The end result is better off-road performance, ability to fit wider and larger tires, as well as a higher driving position.

Dual Rate Coil Springs. The Fabtech Lift Kit comes with four coil springs that feature a dual rate design, allowing for longer suspension travel compared to the stock springs. The first stage of the spring acts as a shock dampener, providing a soft ride, with the ability to extend for additional travel if needed. The second stage is engineered to handle the vehicle payload and deal with large, sudden impacts at higher speeds. The coil springs are corner specific to the Wrangler JL, keeping the vehicle level side to side, even with the increase in suspension travel.

World-Class Shocks. Also included in this kit are four Dirt Logic 2.25 Resi Shocks. They feature a 2.25 Inch stainless steel body housing a 2 Inch billet aluminum piston and a 7/8 Inch NitroSteel BlackPiston rod. The shocks have polyurethane mounting ends to reduce vibrations and noise. The reservoir is made out of 2.25 Inch OD aluminum, offering superior thermal performance.

Premium Components. The four bump stops extensions included in this kit utilize the factory bump stops to retain compliant cushioning at full compression. The factory down travel is maintained in order to eliminate suspension and driveline over-cycling. The extended length front and rear sway bar links come with urethane bushings. They re-position the bars to work within the factory-specified operating planes. By extending the length of the links, the sway bar can’t travel over center and create bind when at full extension travel. The included heavy duty rear track bar bracket re-centers the axle, retaining the factory roll center even with the increased in ride height. As a result, on-road drivability and usability is the same as it is with the OEM setup.

Installation Process. Installing this kit doesn’t require any welding, but it isn’t a job for a novice. An intermediate DIY mechanic could complete the installation process in 3 to 4 hours, but it’s a job best left to a professional if you aren’t completely confident in your abilities.

Application. This Fabtech 3 Inch Suspension Lift Kit fits 2018-2024 Jeep Wrangler 4-Door Models. It will NOT fit 4xe and Rubicon models.

Fitment:

• 2018 Jeep Wrangler
• 2019 Jeep Wrangler
• 2020 Jeep Wrangler
• 2021 Jeep Wrangler
• 2022 Jeep Wrangler
• 2023 Jeep Wrangler
• 2024 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov