Fabtech 2-Inch Sport II Suspension Lift Kit with Shock Extensions (20-24 Jeep Gladiator JT Mojave)Find parts that fit my vehicle

Upgrade your Gladiator. If you have a Jeep Gladiator Mojave and are looking for quality lift kits that don’t cost thousands of dollars, this is the kit you’ve been hoping for. Built by Fabtech, one of the leading aftermarket suspension manufacturers, it offers a 2-Inch front and rear lift, correcting your Gladiator’s nose-down rake and adding some always-valuable extra ground clearance. Since this is Fabtech we’re talking about, it’s worth mentioning that this lift kit was specifically engineered to offer OEM-levels of comfort and on-road compliance along with the added off-road capability.

Dual Rate Coil Springs. Fabtech’s Sport II lift kit includes front and rear coil springs that feature a dual rate design. The first stage of the spring is there to offer a soft ride but has the ability to extend for additional travel if needed. The second stage handles the Gladiator’s payload and is there to address any large or sudden impacts, especially at higher speeds. Because drivability is a major concern with any lift kit, Fabtech paid special focus on making the Sport II as factory-like as possible. This lift kit offers not only superior off-road performance compared to the stock Gladiator setup, but is just as usable in everyday driving as well.

Premium Fox Components. The Jeep Gladiator Mojave is a capable off-roader from the factory. Equipped with Fox 2.5 Internal Bypass shocks, there’s really no need to replace the shocks unless you’re going with an aggressive lift kit setup. To make this kit as affordable as possible, Fabtech decided to use the factory shocks and include a set of heavy duty extension brackets specifically engineered to withstand off-road use and abuse. This kit also retains the Fox hydraulic bump stops while relocating the bump stop pads to work in conjunction with the higher ride height. To make everything fit together nicely, you also get a set of bump stop spacers.

Optimized Suspension Geometry. This kit includes extended length front and rear sway bar links complete with urethane bushings that reposition the bars to work within the factory operating planes. Extending the length of the links prevents the sway bar from going over center and creating bind at full extension travel.

Installation Process. According to Fabtech, installing this lift kit is easy, requiring a jack and some basic hand tools. No welding is required and the entire installation procedure can be completed in a matter of a few hours. You also get installation instructions provided with the kit.

Application. This Fabtech 2 Inch Sport II Suspension Lift Kit fits the 2020-2024 Jeep Gladiator JT Mojave 4WD.

Fitment:

• 2020 Jeep Gladiator
• 2021 Jeep Gladiator
• 2022 Jeep Gladiator
• 2023 Jeep Gladiator
• 2024 Jeep Gladiator

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov