EVO Manufacturing 4.50-Inch Enforcer Stage 3 Suspension Lift Kit with King 2.5 Compression Adjuster Shocks (18-24 2.0L or 3.6L Jeep Wrangler JL, Excluding 4xe)Find parts that fit my vehicle

Description. The EVO MFG 4.5” JL Enforcer Lift Suspension Systems lift your 2018+ Jeep Wrangler JL 4.5”s.

Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift.

The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality with the use of your choice of aftermarket 3-5” lift shocks or use of our EVO SPEC 2.5” Remote Reservoir King Shocks.

These kits come with a set of 4.5” lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side.

EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road.

The EVO MFG 4.5" JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.

4.5” lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model.

2 Door Models (all) will see higher increases in lift. Increases will vary.

Overland: With the option of our Overland Control Arm Drop Brackets while lifted we maintain factory flat control arm angle alleviating much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. This bracket set is fixtured, welded and powdercoated assemblies, not bolt together bracket pieces for a stronger product. Crush sleeves and hardware included. 100% bolt on design.

Stage 1 kits includes all the necessary parts to lift your JL 4.5”s.

Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment

Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

“K” Kits include EVO SPEC King Shocks. "BIL" Kit come with Bilstein 5100 Shocks

Note Depending on actual tire variances and sizes, Some trimming of body sheetmetal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.

These kits require wheel spacers or aftermarket wheels with smaller backspacing.

Front and rear adjustable trackbars are included with PLUS “P” kits.

When paired with packaged shocks, these kits will not require driveshaft replacement.

Warranty. Limited Lifetime Warranty

Fitment:

• 2018 Jeep Wrangler
• 2019 Jeep Wrangler
• 2020 Jeep Wrangler
• 2021 Jeep Wrangler
• 2022 Jeep Wrangler
• 2023 Jeep Wrangler
• 2024 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov