Elka Suspension 2.0 IFP Front Shocks for 0 to 1.50-Inch Lift (20-24 Jeep Gladiator JT)Find parts that fit my vehicle

Increase the off-road capabilities while improving the comfort and handling of your Jeep

The 2.0 IFP shocks provide the optimal combination of:
Firm and stable handling for driving on desert and fire roads (sports car feeling);
Plush compliance while off-road driving over washboard;
Strong ramping effect for extra bottom-out protection over large dips and washes;
Maximum articulation and traction for rock climbing.

BENEFITS
High-performance off-road capabilities
Improved handling and comfort for casual driving
Better traction
Increased protection against bottoming-out

RIDE ENHANCEMENTS
Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
Damping characteristics optimized for each Jeep model, providing a smoother ride
Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
More stable and more predictable handling
Reduced front-end diving when cornering or braking
Reduced rear-end bucking and lifting

TECHNICAL FEATURES
Massive 2.0 in. (46mm) hard-anodized aluminum body for cooler operation
Gas-pressurized design with internal floating piston to prevent cavitation and fading
Internal hydraulic valving optimized for each vehicle platform
Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
Heavy-duty 5/8 in. (16mm) induction-hardened chrome-plated steel shaft
Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
MCU external bottom-out bumper
Direct, bolt-on replacement that uses stock shocks location
Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

The 2.0 IFP model is a simple bolt-on upgrade over OEM shocks. They are a gas-pressurized design with internal floating piston to help prevent cavitation and fading.
This configuration is for use exclusively with stock geometry or with aftermarket lift kits and accommodate between 0 in. to 1.5 in. of lift. This kit does not provide lift and does not include any springs.

Package includes two (2) position-specific shocks:
Two (2) 2.0 IFP front shocks

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov