FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Dirty Dog 4x4 Trench cover (07-18 Wrangler JK 4 Door) on your Jeep Wrangler
Shop Parts in this Guide
1. Locate the seat release on the larger back seat (Figure A).
Figure A
2. With the release pulled, set the larger seat down flat (Figure B).
Figure B
3. On the other side, locate the seat release on the smaller back seat (Figure C).
Figure C
4. With the release pulled, set the smaller seat down flat (Figure D).
Figure D
5. The Dirty Dog 4x4 Trench Cover comes in two sections. Place the longer section over the "trench" behind the larger back seat (Figure E).
Figure E
6. Press firmly along the Velcro on the rear-most section of the longer trench cover (Figure F).
Figure F
7. Place the shorter section over the "trench" behind the shorter back seat (Figure G).
Figure G
8. Press firmly along the Velcro on the rear-most section of the shorter trench cover (Figure H).
Figure H
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 07/11/2018
