FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install RT Off-Road Rock Crawler Front Bumper (87-06 Wrangler YJ & TJ) on your Jeep Wrangler
Installation Time
2 hours
Tools Required
- Torx T55 Socket
- Ratchet
- Torque Wrench
- Tape Measure
- Dead Blow Hammer or Rubber Mallet
1. Remove the OEM front bumper by removing two T55 Torx socket head bolts (1/2” X 1 3/8”) from under the front bumper at the frame rail.
2. Remove four OEM T55 Torx socket head bolts (1/2” X 2 3/8”) and OEM tow hook from the top of the front bumper.
3. Retain OEM bolts and tow hooks for reuse.
4. Slide new RT Off-Road Rock Crawler Front Bumper onto front frame.
5. Align the bolt holes and insert the two T55 Torx socket head bolts (1/2” X 1 3/8”) from under the front bumper at the frame rail. Do not tighten these bolts at this time.
6. Using a tape measure and a soft hammer or mallet, center bumper on frame.
7. Place the tow hook spacers on the frame.
8. Install the tow hooks and four T55 Torx socket head bolts (1/2” X 2 3/8”) into the top of the front bumper.
9. Torque all four top T55 bolts and two bottom T55 bolts to OE specifications.
Congratulations, you have installed your new RT Off-Road Rock Crawler Front Bumper.
Installation Instructions provided by ExtremeTerrain Customer
