How to Install RedRock 4x4 CB Mount - Passenger Grab Bar on your Wrangler

1. Pry out the trim insert off of the passenger grab bar carefully by using a small flat head screwdriver or a pry stick.

2. Unscrew the two 8mm screws that hold the bar to the dash.

3.  Place the bracket (notch facing up) for the CB over the grab bar post closest to the steer ing wheel; place the spacer piece over the post closest to the passenger door.

4. Check for proper alignment of brackets and then resecure the grab bar onto the dash.

5. Your bracket is now ready to accomodate the Cobra 75WXST CB radio.