How to Install Bestop Targa Style Sun Bikini Top - Black (10-18 Wrangler JK 2 Door) on your Jeep Wrangler

1. Carefully open the package using a box cutter or knife (Figure A) and ensure the hardware is included and undamaged.

2. Lay out the bikini top to allow the heat to stretch the material (Figure B).

3. Place the windshield header in the front section of the top (Figure C).

4. Wrap the front of the top over the windshield header and snap the buttons in place (Figure D).

5. Place the top on top of the vehicle and line the front up with the footman loops. Tighten down (Figure E). 

6. Attach the two longer fabric straps over the sport bar and through the buckles (Figure F). 

7. Take the other side of the fabric strap and clip each into the hole on the underside of the sport bar (Figure G).

8. Stretch the fabric over both door tops of the roll cage and smooth the Velcro across (Figure H).

9. Attach the shorter two fabric straps to each side of the strap through the buckle and clip each into the hole on the underside of the sport bar (Figure I).

10. Tighten the two rear corner straps around the sport bar (Figure J).

11. Tighten all straps down.

Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 04/26/2018.