Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details
How to Install Bestop All-Weather Trail Cover - Gray (07-18 Jeep Wrangler JK 4 Door) on your Jeep Wrangler
Shop Parts in this Guide
1. Remove the trail cover from the packaging and pull out of the storage bag. Lay out to full length (Figure A).
Figure A
2. Unroll the trail cover and locate the Bestop tag and ensure it will sit on the passenger side of the vehicle for proper placement (Figure B).
Figure B
3. Begin placing the trail cover over the top of the vehicle (Figure C).
Figure C
4. Secure the front end over the windshield (Figure D).
Figure D
5. Slide the plastic sleeving under the tub on both sides at the rear of the vehicle (Figure E).
Figure E
6. Secure each of the three clips on both sides to the pinch seam on the underside of the vehicle (Figure F).
Figure F
7. Tighten all straps to secure the trail cover to the vehicle.
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 08/10/2018
