How to Install Bestop Front Seat Covers - Tan (07-18 Wrangler JK) on your Jeep Wrangler

1. Remove all six tan seat cover pieces from the packaging (Figure A).

2. Lay each tan seat cover piece out in the sun, flat, to help work wrinkles caused by the packaging out (Figure B).

3. Remove the headrest from the driver's side (Figure C). 

4. Work the tan cover over the driver's side headrest (Figure D).

5. Work the tan back cover over the back portion of the driver's side seat (Figure E).

6. Tug down the tan cover completely (Figure F).

7. Work the tan seat cover over the bottom portion of the driver's side seat (Figure G).

8. Slide the fabric straps through the opening between the seat and back.

9. Run the fabric straps under the seat and up the front of the seat (Figure H).

10. Secure the straps through each of the provided plastic clips (Figure I).

11. Replace the headrest (Figure J).

12. Follow Steps 3-11 on the passenger's side seat.

Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 06/20/2018.