Belltech Suspension Lift Kit; Front and Rear (07-18 Jeep Wrangler JK 4-Door)Find parts that fit my vehicle

Superb Performance. The Jeep Wrangler Rubicon is an amazing vehicle. Off-road capable in stock trim, there’s very little it can’t do. If you’re ready to upgrade your Wrangler though and up your off-roading game, an aftermarket suspension lift kit is exactly what you need. This Belltech Suspension Lift Kit delivers an impressive 4-Inch lift, offering extra ground clearance to minimize bottoming out while simultaneously correcting the factory nose-down rake.

Dominate the Wilderness. The Belltech lift kit ships out with front and rear dual rate coil springs. These springs feature a unique two-stage design. The first stage of the spring softens the ride for on-road compliance, but it can extend when additional wheel travel is needed. The second stage copes with the Wrangler’s weight and absorbs sharp and sudden impacts, especially when travelling at higher speeds.

Street Performance Shocks. This kit also includes Belltech’s premium Street Performance Shocks. Made out of a 55mm body with a 15mm piston rod and a 35mm piston, these shocks are strong enough to withstand the punishments of hardcore off-roading without breaking or sagging. They come with Teflon-coated bushings that avoid metal-to-metal contact, reducing heat and heat-soak, and in doing so increasinging longevity. The shocks feature 35mm of rebound for maximum damping performance.

Adjustable Control Arms. Raising your Jeep inevitably changes front and rear wheel camber. This can often lead to excessive tire wear and all sorts of unwanted issues. Since Belltech’s lift kit raises ride height by a significant 4-Inches, this kit includes front and rear lower and upper control arms to address the change in camber and bring it back to factory levels. You also get adjustable track bars that re-position the axle to where it’s supposed to be, thus preventing excessive driveline and suspension system stress. This kit will clear 35 Inch tires, but it’s important to note that Beltech recommends a 4.5-Inch to 4.75-Inch wheel backspacing.

Installation Process. The kit ships out with installation instructions and all the necessary hardware. Installation is relatively simple, requiring no welding or cutting, but due to the sheer number of components involved, professional installation is recommended if you’re not mechanically-inclined.

Application. This Belltech 4-Inch Suspension Lift Kit fits 2007-2017 Jeep Wrangler JK Rubicon Unlimited 4-Door 4WD.

Fitment:

• 2007 Jeep Wrangler
• 2008 Jeep Wrangler
• 2009 Jeep Wrangler
• 2010 Jeep Wrangler
• 2011 Jeep Wrangler
• 2012 Jeep Wrangler
• 2013 Jeep Wrangler
• 2014 Jeep Wrangler
• 2015 Jeep Wrangler
• 2016 Jeep Wrangler
• 2017 Jeep Wrangler
• 2018 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov