BDS 3 to 4-Inch Upper Control Arm Suspension Lift Kit with FOX 2.5 Performance Elite Coil-Overs (21-24 Bronco 4-Door, Excluding Raptor)Find parts that fit my vehicle

3" Performance Elite Lift Kit - BDS1905FPE

Up the ante in your 2021-2023 Ford Bronco 4 Door with style and performance by installing this 3 to 4-inch lift kit featuring FOX Performance Elite 2.5 coil-over shocks from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 37" tires. Up front the lift kit includes FOX 2.5 Performance Elite Series remote reservoir coil-over shocks and heavy duty tubular upper control arms for increased strength.In the rear BDS utilizes a complementary set of FOX 2.5 Performance Elite coil-over shocks for an improved ride. Net lift height varies based on the factory suspension configuration as follows: 4-Door Sasquatch-equipped net 3" of lift 4-Door Badlands: net 3.5" of lift and 4-Door Broncos with the base suspension: net 4" of lift. FOX Performance Elite FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs offering 10 separate low-speed and 12 high-speed compression levels with a black anodized aluminum reservoir to increase cooling efficiency. HD Upper Control Arms (UCAs) Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed high-stength uniball to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Features-

FOX 2.5 Performance Elite series coil-overs offer improved damper performance over stock
Performance UCAs increase strength and allow for more suspension travel
FOX shocks are fully serviceable and resistant to corrosion and harsh environments.
Factory Protection Plus drivetrain warranty included
Easy 100% Bolt on installation
Details-

Installation Time: 3-4 Hrs
Installation Difficulty: moderatelyEasy
Rear Lift Height: 3-5IN
Front Lift Method: Coil Over
Rear Lift Method: Coil over
Front Lift Height: 3-5IN
Shocks Included: Yes
Notes-

Lift height is based on base suspension package Badlands and Sasquatch models will net less lift however final ride height is the same for all trims.
Do NOT hit the aluminum knuckle with a hammer to separate the ball joint. Use appropriate ball joint separation tool (OTC 204592).
Will not work with models with a height sensor attached to the UCA.
Does not fit Bronco Sport models.
Not compatible with Raptor Models.
Is compatible with HOSS 3.0 Bronco Models

Fitment:

• 2021 Ford Bronco
• 2022 Ford Bronco
• 2023 Ford Bronco
• 2024 Ford Bronco

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov