Atturo Trail Blade X/T Multi-Terrain Tire (35" - 35x12.50R18)Find parts that fit my vehicle

Versatile Trail Blade Tire. Atturo’s Trail Blade X/T Multi-Terrain Tire is crafted to give your Gladiator that aggressive off-road look and performance, while maintaining its graceful daily drive. It also comes with a resilient rim guard to help protect your vehicle’s rims against curb damage and increase their service life.

Features Impressive Treads, Channels, and Shoulder Blocks. The smaller center tread blocks create extra channels, enhancing the tire’s wet and snow traction. The blocks are also linked, which increases the tire’s stability when driven on the highway. In addition, the angled shoulders give the truck smoother handling, so you can control your vehicle more efficiently even when it’s on the rough trails.

Crafted to Take on Tough Road Conditions. This Trail Blade X/T Multi-Terrain Tire is constructed out of a premium-quality compound. As a result, the tire can be used off-road, as well as on the highway.

Features Alternating Horizontal and Vertical Sipes. This multi-terrain tire is designed with alternating horizontal and vertical sipes. These sipes not only leave a gorgeous trail on the dirt road, but they also help control the tire’s noise and improve its snow traction.

Comes With 2 Warranties. Each Trail Blade X/T Multi-Terrain Tire purchased is backed by a 3-year manufacturer’s defect warranty and a 45,000-mile warranty. Check out Atturo’s website if you’re interested in learning more about the warranty’s terms and conditions, as well as its exclusions.

Application. The Atturo Trail Blade X/T Multi-Terrain Tire in 32-Inch to 35-Inch Diameters is designed with a universal fitment.

What is the best gear ratio to run for larger tires? When you increase the diameter of your tires, your vehicle's engine has to work harder to turn them. Naturally, this will lead to increased fuel consumption and reduced performance. So, when upgrading to a set of larger tires you should re-gear your rig to regain this lost acceleration, performance and fuel economy.

Find your original tire size and gear ratio using the chart listed below, the intersection should be your approximate RPMs at 65 MPH. Then find your new tire size and follow it across to the closest RPM to your original tires, this will be your gear ratio choice.

This chart is based on driving at 65 MPH with a 1:1 gear ratio and a manual transmission in 4th gear. Please note if your vehicle is equipped with an automatic transmission your RPMs will be higher due to normal transmission and the torque converter slippage. In overdrive your RPMs will be approximately 15% to 30% less than indicated.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov