Artec Industries Under Armor; Bellypan Kit (12-15 Jeep Wrangler JK 4-Door)Find parts that fit my vehicle

love the inner fenders

pleased with the inner fenders, careful on the install on the passenger side. existing factory wiring harness is located behind the wall you have to drill.

I love the bumper!

I loved the raw steel look of the bumper. Received it fast. No instructions included so I had to email the website and artec for assistance when the bumper would not line up with the bolt on holes. They responded fast and were helpful. Had to cut about an inch and a quarter off the top of the crash bar On both sides and relocate the air pump that’s behind the stock bumper. (Had to order a relocation bracket). After that it fit perfect. Worth the effort in my opinion. Well built, stubby, and about 60-70 pounds. Kept the raw steel look and just wiped it with anti-rust spray. Also the fog lights will require new screws with nuts or a new way to lock them in the place. They lined up perfectly tho. I recommend it if you’re looking for a well built bumper and are willing to put in the extra work to install it. (Making the cuts with a grinder,relocating the air pump, getting screws for the fog lights.

Great Quality, Easy Install

Ordered this product on a Friday and received it by the next Thursday. Installed in less than an hour, has a good use if going off-roading, but not really a streetcar look. Overall a great quality product though.

great kit for the dana 30!

ill recommend sending it to a pro to do the install, totally worth it and if you add sleeves and c gussets its even greater! im happy with artec and their product (which i also bought the front and rear track bars and rear spring relocation kit because my rear springs were not having it with the lift and had a bunch of bow!

This thing can take serious punishment..but

I took a hard hit on my stock member and folded it right in half . Order this. Very easy install and this thing took some serious hits as I am in a stock hight jku and took a blue/black trail at raush with some 4in lifted jeeps on 37s because my group bailed so I was with them and there was no turning back . This thing stood up to some heavy hits with no issues . My MORE trans and oilpan skid plate did not mount up correctly so I had to drill some holes before mounting . Then my MORE transfer case skid plate came ... and same thing it did not fit so I had to take the whole crossmember and the other skid plate off in order to drill more holes and get everything in correctly. So overall this thing is a beast . Just make sure your willing to drill into it to add more skid plates

Wow!

These are beeeeefy shock tabs. This is some high-quality stuff! If you need, I highly, highly recommend!

Nice fit

Great fit for Jeep Jk’s, don’t know about other models.

Beautiful!

The only thing that kind of bothers me is when I get a ton of rocks and debris stuck in between the sliders and the side armor. They are manufactured with a small gap and its really difficult to get clean sometimes. Otherwise these sliders are an excellent choice for a "boat-side" type slider

Rugged!

Got a ton a skid plates installed all at once and I figured I might as well buy a heavy duty crossmember at the same time. Fit perfect, much heavier than stock, and im sure it will hold up with no issue!

Great

Good look for the jk. Love the look and feel of this bumper